Le Chai LMN70 Bedienungsanleitung Seite 69

1. When open the door 90 degree, take out 2 screws (2) from lower door axis (3), remove the door (4),
then pull out the door and door axis (Fig. A).
2. Put the door (4) safety and take out the plug (12) from top of door frame, unscrew 1 screw (11) at
bottom and remove the Door limit device (10), then install the Door limit device (10) at top of door
frame, please use spare plug (12) to block the hole at top of door frame. (Fig. A/B)
3. Take out 3 hinge screws (6) from top hinge (right) (5) and remove it. (Fig. C)
4. Remove decorative nail (8) from left top of cabinet and install spare top hinge (Left) (7) at left top of
cabinet with 3 screws. (Fig. D)
5. According above procedure, install spare lower hinge (left) (9). (Fig. E)
6. The door revolves 180 degrees, install the door with same way it was removed and fix it with door
aligned.
7. Block the hole at right top of cabinet with spare decorative nail (8).
Repairs and spare parts available
The manufacturer's warranty is applicable for this device for a period of 2 years.
In the event of a malfunction during this period, any request for support must be made to the after-sales
service of your dealer.
Outside the warranty period, any information regarding professional repair services or ordering original
spare parts may be obtained by contacting your dealer.
In accordance with the Ecodesign Regulation, spare parts will be available for at least 7 years from the
date of purchase of your device.
Imported by SIDEME SA / BP200 – 92306 Levallois-Perret cedex – France
GUARANTEE
68