Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fitting the spikes
•
First set up the speakers at their intended location. To determine the correct dis-
tances (walls, listening position, etc.) and placement angle to the listening position,
the Solitaire speakers can be easily moved and aligned with the assembled funiture
castors.
•
Once the speakers are correctly aligned in their final position, the distances and an-
gles should be noted or marked.
•
First of all pay attention that the brakes of the casters are firmly locked.
•
Install the front spikes first. One person will slightly tilt the speaker cabinet back-
wards, while another person will remove the furniture castors and attach the spikes
as shown below.
•
After the spikes are mounted, the floor contact plates must be positioned under the
spikes on the floor.
•
Slowly lower the speaker until the spikes are on the floor contact plates. If necessary,
correct the position of the floor contact plates again before completely removing the
speakers.
•
The small recess in the floor contact plate centers the spike.
•
Now repeat the steps described above for the rear spikes.
The spikes have extremely sharp points which could cause injury; please handle them with
great care, and keep them well away from children.
The spikes feature sharp points which may damage delicate surfaces (e. g. parquet flooring
or tiles). Always place the floor contact plate underneath the spikes for protection.
Take special care that the speaker does not slip away on the floor contact plates. Tilt the
speaker only so far that the spikes can be mounted.
Make sure that the rollers are aligned straight and the brakes are locked.
27
Werbung
Inhaltsverzeichnis
