Use; Before First Use - Siguro SGR-ST-D400W Bedienungsanleitung/Übersetzung Der Originalanleitung

EN

USE

Before first use

Remove the appliance and its accessories from the packaging. Before disposing of
the packaging, be sure to remove all components. Check that the appliance and any
accessories are not damaged.
Wipe the appliance surface and accessories with a slightly damp cloth. Wipe dry.
Principles of steam cleaning
Steam cleaner is suitable for a quick, regular, and effective cleaning of hard surfaces
at home without using chemicals. The principle of steam cleaning is based on quick
transformation of cold water to hot steam which is pushed out of the steam clea-
ner through a nozzle. It is so-called dry steam that is formed only from a very small
amount of water. Dry steam is suitable for removing dirt and grease, it is gentle to the
treated surfaces as the surface only moistens. High temperature steam can kill all bac-
teria and sterilize the treated surfaces. Thanks to supplied attachments, the steam can
penetrate even in hart-to-reach places.
Assembly and using the accessories
Long flexible hose
Screw the flexible hose and tighten firmly. You can use the flexible hose both separa-
tely and you can attach the concentrator, round brush, angle nozzle, or brush nozzle to
the connector to extend the reach of the attached accessory.
Concentrator
To attach the concentrator, align a white dot on the concentrator with a symbol of
open lock on the steam cleaner and turn the concentrator clockwise till the white dot
is aligned with a symbol of closed lock. Check the concentrator is correctly attached
and it does not move.
The concentrator is suitable to remove dirt from hard-to-reach places, from corners,
gaps, etc. The close the concentrator is to the treated place, the greater the cleaning
efficiency will be because the temperature and steam volume are at their highest at
the steam output.
The concentrator can be combined with a round brush or angle nozzle to get better
results.
Round brush
You can attach the round brush on the steam cleaner connector, flexible hose co-
nnector, or concentrator. Always ensure it is firmly attached.
The brush is used to remove stubborn dirt. Stubborn dirt can be removed more easily
by brushing.
Do not clean the sensitive or delicate surfaces by brush. They may be damaged.
Angle nozzle
You can attach the angle nozzle on the steam cleaner connector, flexible hose co-
nnector, or concentrator. Always ensure it is firmly attached.
The angle nozzle is used to remove dirt from hard-to-reach or narrow places, from
corners, etc.
Brush nozzle
To attach the brush nozzle, align a white dot on the nozzle with a symbol of open lock
on the steam cleaner and turn the nozzle clockwise till the white dot is aligned with a
symbol of closed lock. Check the nozzle is correctly attached and it does not move.
The brush nozzle is used to remove dirt and dust from washable surfaces in the
bathroom, to clean mirrors, working desk in the kitchen, etc.
Attach the cloth on the brush nozzle to remove dirt and dust from sensitive surfaces,
EN - 8