Technical Data; Specified Conditions Of Use; Emergency Procedure; General Power Tool Safety Warnings - Gude DS 140 Originalbetriebsanleitung

ENGLISH

Technical Data

Delta sander
Art. No
Service connection
Rated input
No-load speed
Orbital travel diameter
Dimensions of grinding plate
Weight
Noise details
Sound pressure level L
pA
Sound power level L
WA
Measured according to EN 62841;
Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) determined
according to EN 62841:
Vibration emission value a
Uncertainty K =1,5 m/s
2
Wear ear protectors!
WARNING: The vibration emission level will vary becau-
se of the ways in which a power tool can be used and
may increase above the level given in this information
sheet.
The vibration emission level may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
An estimation of the level of exposure to noise should
also take into account the times when the tool is
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period. Identify additional safety
measures to protect the operator from the effects of
noise such as: maintain the tool and the accessories and
organization of work patterns.
WARNING
The noise emission level given in this information sheet
has been measured in accordance with a standardized
test given in EN 62841 and may be used to compare
one tool with another. It may be used for a preliminary
assessment of exposure.
The declared noise emission level represents the main
applications of the tool. However if the tool is used
for different applications, with different accessories or
poorly maintained, noise emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to noise should
also take into account the times when the tool is
12
DS 140
58227
230 V ~ 50 Hz
200 W
12000 min
1 mm
140 x 140 x 90 mm
1,2 kg
77,3 dB(A)
88,3 dB(A)
11,009 m/s²
h
switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the ope-
rator from the effects of noise such as: maintain the tool
and the accessories and organization of work patterns.
Exposure to noise can cause hearing loss.
-1
Read and understand the operating
instructions before using the
appliance.
Familiarise with the control elements
and how to use the appliance properly. Abide by all the
safety measures stated in the service manual. Act
responsibly toward third parties. The operator is
responsible for accidents or risks to third parties.
Persons over 16 years of age can only work on the appli-
ance. An exception includes youngsters trained in order
to reach knowledge under supervision of the trainer
during occupational education.
In case of any doubts about connection and operation
refer please to our customer center
Save all warnings and instructions for future
reference.

Specified Conditions of Use

The sander can be used for sanding wood, plastics and
metal. This machine is suitable only for dry sanding.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and
summon qualified medical attendance as quickly as pos-
sible. Protect the injured person from further harm and
calm them down. If you seek help, state the following
pieces of information
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)

General Power Tool Safety Warnings

WARNING Read all safety warnings, instruc-
tions, illustrations and specifications provided with
this power tool. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.