Technical Data; Specified Conditions Of Use; Emergency Procedure - Gude EXS 20-201-24 Originalbetriebsanleitung

ENGLISH
10

Technical Data

Eccentric sander
Art. No
Battery voltage
No-load speed
Dimensions of grinding plate
Weight
Weight without battery/
Charging equipment
Recommended Ambient
Operating Temperature
Recommended battery types
Recommended charger
Noise details
Sound pressure level L
Sound power level L
Measured according to EN 60745;
Uncertainty K = 3 dB (A)
Wear ear protectors!
Vibration details
Vibration total values (triaxial vector sum) deter-
mined according to EN 60745:
Vibration emission value a
Uncertainty K = 1,5 m/s
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
should also take into account the times when the
tool is shut down or when it is running but not
actually in use. This may significantly reduce the
vibratory load over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
EXS 20-201-24
58817
6000 - 11000 min
125 mm
1,5 kg
1,08 kg
-18°C ... +40°C
AP 20-20, AP 20-40
LG 20-24, LG 20-35
81,4 dB (A)
pA
92,4 dB (A)
WA
8,632 m/s²
h
2
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
20 V
the service manual. Act responsibly toward third
-1
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center

Specified Conditions Of Use

The sander can be used for sanding wood, plastics
and metal. This machine is suitable only for dry
sanding.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.

Emergency procedure

Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)