Ingersoll-Rand QA6 Serie Technische Produktdaten Seite 5

Controls
Schematic Diagram for Four-Way Valve
See drawing 16606287 in page 2 for the schematic ow diagram of four-way valve piping for controlling forward and reverse operation of the
motor.
Item No.
1 Live Air
2 Four-way Throttle Valve
3 Exhaust
The air-in and exhaust is explained in drawing 16606279 in page 2.
Item No.
1 Cycle Count Sealing Set Screw
2 Cycle Count Port
3 Primary Exhaust
4 Secondary Exhaust (Forward) Inlet (Reverse)
5 Inlet (Forward) Secondary Exhaust (Reverse)
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that
they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand O ce or Distributor.
Model Identi cation
QA 6 A A
L Lever
6 0.66 HP A Angle
8 1.00 HP
R Remote
S In-Line
16601064_ed5
Description
Description
L S 030
Angles
S ASO
030
D Direct
040
Drive
055
070
090
115
150
200
225
In-Lines
025
030
040
055
070
090
115
150
180
Item No.
4 Forward Inlet, Reverse Exhaust
5 Reverse Inlet, Forward Exhaust
Item No.
Exhaust
Air In
Forward
O
Reverse
N P
Lever
P Standard
Gearcase
N 3/8" NPT
B 3/8" BSP
F Flanged
Remote
Mounting
N 1/2" Tube
B 13 mm Tube
Description
Description
35 S
35 = 35 mm Head S Square
43 = 43 mm Head
48 = 48 mm Head
56 = 56 mm Head
41 = 100 mm Spindle,
19 mm float
61 = 150 mm Spindle,
38 mm float
81 = 200 mm Spindle,
38 mm float
EN
06
06 3/8"
08
1/2"
12
3/4"
EN-3