Sachtler Soom Handbuch Seite 16

SOOM
Á Mount the TriPod incl. TriSpread, as described in
chapter 3.
Á When using the Tube, choose the wider arm angle
of the TriSpread to reach the big footprint of the
TriPod.
Á Check, that there are no SOOM clamping bowls
mounted to the ring bowls of TriPod nor
TriSpread.
Á Make sure the Tube´s foot stabilizer is folded up
against the base.
Á From above, pass the Tube through the ring bowls
of the TriPod and TriSpread until the end position
is reached. Make sure that the foot stabilizer is in
alignment with the notches of both ring bowls.
Á The end position will be reached when the Tube
snaps in place in the ring bowl of the TriPod.
There is an audible click when it snaps completely
in place at top ring bowl.
- 11 -
Manual
Locking bolt
picture 8