Sachtler Soom Handbuch Seite 12

SOOM
Á Dismantle the TriSpread from the TriPod, as
described in chapter 3.3.
Á Mount the SOOM clamping bowl into the ring bowl
from bottom until it snap in place, as described in
chapter 3.5.
Á The height range can be adjusted via extension of
the arms and by adjusting the arm angles.
Angle setting:
Á Fold them to the inside (1) to release the pressure
on the arms of the TriSpread.
Á Turn the ring at the top of the ring bowl in the
desired direction (2).
Á TriSpread should always be set to HIGH or LOW
position. It is not intended to function at positions
between these settings.
- 7 -
Manual
picture 5