Chauvin Arnoux PEL51 Schnellstartanleitung Seite 7

INSTALLING PEL TRANSFER
Download the latest version of PEL Transfer from our website:
„
Launch setup.exe.
„
Then follow the installation instructions.
„
Refer to the operating instructions for full installation details.
CONNECTING THE DEVICE TO THE PC
Connect the PEL's voltage inputs to the mains supply. The device turns on.
„
Enable the wifi access point
„
For the wifi to operate, the battery must be sufficiently charged (
Connect the PEL to your PC via wifi.
„
Double click the PEL icon
„
Select the Add device
„
When the connection with the device is established, its name should be displayed on the left side of the window
„
in the PEL Network folder tree.
Refer to the operating instructions for a
®
WIFI AP of the device in the configuration menu
on the desktop to open PEL Transfer.
icon on the toolbar, then PEL51 or PEL52, then wifi in access point.
WIFI ST connection.
www.chauvin-arnoux.com.
or ).
.