Connection; Connecting The Dispensing Modules; Dos G 80 With Hose Adapter; Dos G 80 Profiline With Hose Adapter And Dispenser Connection - Miele DOS G 80 Montageanweisung

DOS G 80 with
hose adapter
DOS G 80
ProfiLine with
hose adapter and
dispenser con-
nection

Connecting the dispensing modules

Please note that all dispensing modules and accessories supplied
with them must only be fitted and commissioned by the Miele Cus-
tomer Service Department or authorised service technicians.
The DOS G 80 module can be connected as standard to the washer-
disinfectors and commercial dishwashers listed under "Areas of ap-
plication for dispensing modules".
The following accessories, which are supplied with the relevant dis-
pensing module, must be used for connection to commercial dish-
washers marked with an asterisk *.
The hose adapter for dispenser connections with larger diameters is
supplied with the DOS G 80 and must be used with G 8066 and
PG 8067 commercial dishwashers.
Using the adapter increases the diameter of the dispensing hose to
match the diameter of the connection.
The dispenser connection and the hose adapter are supplied with the
DOS G 80 ProfiLine and must be used with ProfiLine commercial
dishwashers.
Remove the blind stopper and fit the dispenser connection.

The dispenser connection may be hidden behind the back panel of
the commercial dishwasher.
en - Connection
21