Set-Up Instructions - Skandika Motalla Bedienungsanleitung

STEP 4
1. Connect the cables (b-2) to console (G) and carefully attach the console bracket (F) to the unit with the
screws (a).
TEP 4:
2. Fix console (G) and tablet holder (g) with the screws (c).
3. Connect the cable ends (b-1) and (b-2).
) Use a cross wrench to remove the tablet(F) screws(c) ,then connect the wiring(b-2) to the outlet o
4. Mount the two footrests (L) with the nuts (d1/d2) on both sides of the bar (N).
he tablet(g), and fix the screws(c) on the tablet holder.
) Use an Allen wrench to remove the screw (a) from rower and fix the tablet holder (F) on the whole
Note: The tablet holder (g) has a cord with a retaining clip in which you can fix your tablet or smartphone. The
ower machine.
holder supports devices with display sizes up to approx. 10 inches (25.4 cm).
) Connect the rower machine wire (b-1) to the outlet of the tablet(b-2).
) Then use the hexagon socket wrench to lock the (d1)\ (d2) nut on the foot pedal shaft (N).
d1
Make sure that all connections are correctly tightened before using the unit.
(4)

SET-UP INSTRUCTIONS

a
F
e
b-1
N
g1
L
24
(4)
H
g
c
A
G
b-2
g2
L
d2