Mixcder G1 Bedienungsanleitung Seite 4

6/!Dpouspm!hvjefmjoft
Gvodujpot!
Manual on/off
Play/pause (phone connection mode
only)
7/GBRt!
Q: Can I talk through the wireless adapter?
A: Yes. During working, if the software of the game console, mobile phone,
computer and other devices starts the call function, double-click the multi-function
button to start the wireless call function. After the function is turned on, the voice
call can be realized.
Notes:
To achieve this function, the device is equipped with a sound card protocol,
and the earphone with a microphone function;
Q: How to clear the pairing information in the adapter?
A: In the power on state, press and hold the Multifunction button for 2s to make
the product enter the pairing mode (the white indicator and the blue indicator flash
alternately), and then double-click the power key (the white indicator and the blue
indicator are on for 2s). The product will clear the list of previously paired bluetooth
and enter the pairing mode;
Q: How does the earphone return to factory settings?
A: Remove the earphone From the charging case and press and hold the Touch area
until the earphone is turned off (the LED light turns red and goes out). Then press
and hold the Touch area again to start the machine until the red light is on for a
long time and then goes out (about 15 seconds). Finally, put it back into the
Charging case and cover it to complete the factory settings reset.
Pqfsbujpo!
Touch and hold the touch area for 5 seconds
Touch the left or right touch area twice
EN-3