ABB ACQ580-34 Kurzanleitung Für Die Installation Und Inbetriebnahme Seite 18

18 EN – Quick installation and start-up guide
Use the control panel to do the start-up procedure. The two commands at the bottom
of the display (Options and Menu) show the functions of the two softkeys
located below the display. The commands assigned to the softkeys are different
depending on the context. Use the arrow keys , ,
change values depending on the active view. The key
page.
1.
Power up the drive. Make sure
that you have the motor name-
plate data available.
Select the language you want to
EN
use and press
Note: After you select the lan-
DE
guage, it takes a few minutes for
the control panel to wake up.
ES
FR
IT
TR
4.
In the Main menu, go to Parameters > Complete list > 95 HW config-
uration by pressing
2.
In the First start assistant screen,
select Exit and press
(OK).
(Select) repeatedly.
and to move the cursor or
?
shows a context-sensitive help
3.
In the Home view, press
(Next). (Menu) to enter the Main menu.
5.
Select 95.01 Supply voltage and
press (Edit).
Select supply voltage 380...415 V
or 440...480 V and press
(Save).
Go back to the Main menu by
pressing (Back) repeatedly.
In the Main menu, select First
start assistant and press
lect). In the First start assistant,
select Start set-up and press
(Next).
and
(Se-