Introduction; Device Description; Scope Of Delivery; Proper Use - Scheppach 59081049974 Original Bedienungsanleitung

1. Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the ma-
chine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description

1. Drive clutch lever
2. Speed lever
3. Handle (heated)
4. Axle gear lock trigger
5. Control trigger
6. Clutch lever of the feed screw
7. Headlamp
8. Shaft lever
9. Operating lever for ejection height
10. Ejection cover
11. Belt cover
12. Ejection shaft
13. Skids
14. Shear bolts
15. Scraper bar
16. Feed screw
17. Gearbox housing of the feed screw
18. Shaft cleaning tool
19. Side cutting bars (not supplied)
Motor
20. Tank cover
21. Aspirator
22. Safety ignition switch
23. Choke
24. Electric starter button
25. Power cable plug
26. Electric starter
27. Reverse starter
28. Engine oil filler cap with oil dipstick
29. Throttle
30. Fuel valve

3. Scope of delivery

31. Snowblower unit
32. Ejection shaft
33. Steering rod
34. Bottom handle
35. Shift rod
36. Adjustment crank
37. Operating manual
38. Enclosed accessories bag
39. Accessory bag fitting

4. Proper use

The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
The device is intended exclusively for snowblowing.
An element of the intended use is also the obser-
vance of the safety instructions, as well as the as-
sembly instructions and operating information in the
operating manual.
www.scheppach.com
GB | 29