JMA EVO XPERT Anweisungshandbuch Seite 33

Inhaltsverzeichnis

Verfügbare Sprachen

• First the Mobile (setting it to Hotspot mode).

• Then the EvoXpert.

Any browser installed on the mobile can now be used to type in the

hostname of the EvoXpert (http:// EVOXPERT-C21C40) or the IP address

assigned to the EvoXpert and an Internet connection will be established via

the 3G/4G service on the mobile.

4.3.2

If, for whatever reason, you forget to establish a mobile Hotspot

connection while inside the store, you can follow the Wi-Fi configuration

steps described in Sections 4.2.2.1 and 4.2.2.2, with a few differences:

• Because your mobile is in Hotspot Mode (producing a Wi-Fi

network), this handset cannot be used to connect to the Wi-Fi being

produced by EvoXpert.

Therefore, and ONLY to establish this initial connection via the already

known IP address 192.168.8.1, you will need a tablet, mobile or other device

with Wi-Fi to connect to the EvoXpert and navigate to the Connections page

to search for the Wi-Fi from the mobile being used as a hotspot.

• Because EvoXpert was already configured to connect to your

business Wi-Fi, you will need to hold the Reset button for 1 second and

return the machine to its default settings in AP Mode (Access Point) so the

"EVOXPERT" Wi-Fi network is activated.

IMPORTANT: If you do not hold the button down (producing a short press),

you will perform a standard reset.

Therefore, you should perform this first part of the connection process with

the mobile you are NOT using in HotSpot Mode in order, as explained above,

to connect to the EVOXPERT Wi-Fi network generated by your terminal and

open the default web page at 192.168.8.1 from any web browser on that

mobile:

Or access that web page by opening JMA KEY CLONING PRO:

Where the terminal is selected and the website opened in a single step by directly

accessing the Connections page, where the HotSpot Wi-Fi network from the mobile

is entered.

After waiting for the EvoXpert to restart, you can check that the EvoXpert is

actually connected to that HotSpot Wi-Fi network in shared connections (connected

devices).

Inhaltsverzeichnis