Selection Of The Right Harness Size; Correct Use Of Harness Closure; Adjustment Redjustment Buckles - TEUFELBERGER bMOTION light Herstellerinformation Und Gebrauchsanleitung

Use
2.3. EN 361
These harnesses are mainly used for fall
arrest purposes, i.e., they support the entire
body of the wearer and, in the event of a
fall and after arresting a fall, hold him/her
in an upright position.
2.4. EN 358 (ONLY BMOTION PRO)
This harness belays its wearer at the work
site (work positioning) or prevents the wear-
er from reaching a location from where
he/she can fall down (restraint function).
A work positioning harness to EN 358 by
itself is not suitable for fall arrest purpos-
es! In order to provide protection against
falls from a height, it may be necessary
to use configurations including collective
equipment (e.g., safety nets) or personal
protective equipment (e.g., fall protection
systems to EN 363)!
3. SELECTION OF THE
RIGHT HARNESS SIZE
Weight of wearer
(= body weight + equipment):
130 – 350 lbs. / 60 – 150 kg
B
C A
D
6
M - L L - XL
170-180cm 180-190cm
A
5'6-5'9ft 5'9-6'2ft
95-110cm 105-120cm
B
3'1-3'6ft 3'4-3'9ft
90-105cm 100-120cm
C
3-3'4ft 3'3-3'9ft
58-68cm 65-75cm
D
1'9-2'2ft 2'1-2'5ft
4. CORRECT USE OF HARNESS
CLOSURE AND ADJUSTMENT
REDJUSTMENT BUCKLES
4.1. SMARTLOCK-BUCKLES
Closing the buckle
Push the parts of the buckle together
until you hear a "CLICK" noise. Check
proper locking/functioning of the buckle
(buckle halves freely movable inside
each other, small gap between buckle
halves; pulling at both buckle halves).
The lock symbol must be clearly visible
in the little window.
Opening the buckle
1. Push buckle halves together.
2. Simultaneously press both unlocking
buttons towards.
3. Pull parts of the buckle apart.
4.2. ADJUSTMENT OF BUCKLES
Pull end of strap to tighten it. Pull tongue to
loosen it.