Storage And Cleaning; Specifications - Braun TrueScan BPW4100 Handbuch Für Fortgeschrittene

Storage and cleaning

Keep the unit in the storage case when not in use. Clean the product with a soft, slightly
damp cloth. Do not wet the cuff or attempt to clean the cuff with water. Do not wash
or dry clean the cuff. Do not store the product in a place exposed to direct sunlight or
high humidity. Remove the batteries if the unit will not be used for 3 months or longer.
Always replace all of the batteries with new ones at the same time. If needed, please use
ultraviolet radiation for if disinfection.

Specifications

Model:
Operation principle:
Display:
Measuring range:
Blood pressure
measurement:
Pulse rate:
Laboratory accuracy:
Inflation:
Power supply:
Electric Shock Protection:
Operating Environment:
Transport and
Storage Environment
Cuff:
Accessory:
If device is not used within specified temperature and humidity ranges the technical
accuracy can not be ensured.
BPW4100
Oscillometric method
Liquid Crystal Display
0-280mmHg (cuff pressure)
Systolic pressure: 60-280mmHg
Diastolic pressure: 30-250mmHg
40-180/min
Cuff pressure: ±3mmHg
Pulse rate: ±5%
Automatic, soft adapted to blood pressure
2 batteries, type LR03(AAA)
Internal power supply appliance type BF
Temperature +10 C / +40 C
Humidity 15 ~ 85%RH (Noncondensing)
Atmospheric Pressure 105 kPa ~ 80 kPa
Temperature -20C / +60C
Humidity 15 ~ 85%RH (Noncondensing)
Atmospheric Pressure 105 kPa ~ 80 kPa
Suitable for wrist circumference of 13.5 to 21.5cm
Batteries(2*AAA)
12