Setting Cooking Time - Whirlpool AKZ 476/IX Bedienungs- Und Wartungsanleitung

SETTING COOKING TIME

This function can be used to cook food for a set length of time, from a minimum of 1 minute to the
maximum time allowed by the selected function, after which the oven switches off automatically.
1. Once the temperature is confirmed, the symbol
2. Turn the adjustment knob to display the desired cooking time.
3. To confirm the cooking time, press button
SETTING END OF COOKING TIME/START DELAYED
IMPORTANT: the start delayed setting is not available for the following functions: FAST
PREHEATING, BREAD/PIZZA, GENTLE CONVECTION BAKE.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times
will be slightly longer than stated in the cooking table.
N.B.: Delay to start functionality is not available for Grill and Turbo Grill functions.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59
minutes. This can only be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the
symbol flashes.
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1. Turn the "Browse" knob to display the time you wish cooking to end (for example 16:00).
2. Confirm the selected value by pressing button
indicating that the setting has been made correctly.
3. The oven will automatically delay the start of cooking so as to finish cooking at the set time.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the
cooking time of pasta. The maximum time which can be set is 23 hours and 59 minutes.
1. With the "Functions" knob at zero, turn the "Browse" knob to display the desired time.
2. Press button to start the countdown. When the set time has elapsed, the display will show "END"
3
and an acoustic signal will sound. To mute the acoustic signal, press button
appears on the display).
SELECTING SPECIAL FUNCTIONS
Turn the "Functions" knob indicator to the symbol
To browse, select and start one of these functions, proceed as follows:
DEFRO
1. Turn the "Functions" knob to symbol
corresponding symbol.
2. Turn the "Browse" knob to scroll the list of functions; DEFROST, KEEP WARM, RISING.
3. Press button to confirm.
3
flashes.
.
3
: the two dots of end of cooking time flash,
3
to access a submenu containing special functions.
WARM
: the display shows " DEFROST" along with this function's
EN12
(the time of day
3
RISIN