Blumfeldt Cosmic Beam Bedienungsanleitung Seite 13

• Do not replace or attempt to remove the heating element.
• Do not use the radiant heater in the immediate vicinity of a bath, shower
or swimming pool.
• This product must not be exposed to the elements for a long period of
time.
• Do not touch the plug with wet or damp hands.
• Do not run the power cord under a carpet. Do not cover the power cord
with carpets, rugs, or the like. Lay the power cord so that no one can trip
on it.
• Do not wrap the power cord around the device.
• Make sure that no foreign objects enter the ventilation or opening of the
heater, as this can lead to electric shock, fire or damage to the device.
• To avoid a possible fire, the ventilation slots must not be blocked.
• The heater has hot and sparking parts inside. Do not use in areas where
gasoline, paint, explosive and / or flammable liquids are being used or
stored. Keep the device away from hot surfaces and open flames.
• If possible, avoid using an extension cord as it can overheat and cause a
fire. However, if you do need to use an extension cord, make sure that it is
suitable for outdoor use and, preferably, has a circuit breaker or is plugged
in.
• Always make sure that the heater is plugged into a suitable socket that has
been approved for outdoor use.
• Always unplug the appliance and make sure that the device is completely
cold before transporting, cleaning or storing it.
• This heater is intended for domestic use only and should not be used
for commercial purposes. Any other use not recommended by the
manufacturer could result in fire, electric shock or personal injury.
• The use of attachments on the heater is not recommended.
• Do not use this heater with a programmable socket, timer, separate
remote control, or any other device that automatically turns the heater on
as there is a risk of fire if the heater is covered or incorrectly positioned.
Important note on transport security
Transport locks made of foam are located between the grids of the radiant
heater. Completely remove the transport locks before using the device,
otherwise there is a risk of fire.
EN
13