Siemens PA0820M Gebrauchsanweisung Seite 40

Programming the appliance start time
J Press the "Ti m e r" key
cursor on the timer menu. The last function
programmed appears by default
J Use the "+" and "–" keys to select the
"Start" function
J Use the "down" key (see "up" and "down"
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
J The time changes 15 minutes at a time.
J Press the "Timer" key
seconds without touching any keys to
memorise the set start time.
Instructions for Use
, to position the
, (see "+" and "–" keys).
, or wait for 10
J The set time is displayed on the screen
together with the relevant symbol (the
"Start" symbol
10 sec/
Programming the appliance "Start" / "Stop"
timer
J Press the "Ti m e r" key
cursor on the timer menu. The last function
programmed appears by default.
J Use the "+" and "–" keys to select the
"Start" function
J Use the "down" key (see "Up" and "down"
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
40
) and the set functions.
, to position the
, (see "+" and "–" keys).