Siemens PA0820M Gebrauchsanweisung Seite 39

J To set the time, it is necessary to turn the
appliance on by pressing the "On" key
If you take more than 10 seconds to
perform the next operation during
programming / setting the clock on your
appliance, the screen automatically returns
to the main menu and the factory-set
default settings are displayed or, if this is
not the first time that the timer is set, the
last settings used are displayed on the
screen.
J Press the "Timer" key
box appears on the timer menu with the last
function selected ("Off" is displayed by
default).
J Use the "up" key to place the selection box
on the time. The time is modified using the
"+" and "–" keys. The time increases or
decreases by one minute each time one of
these keys is pressed. Keep the key
pressed in to increase or decrease the
minutes more quickly.
Instructions for Use
.
. The selection
39
J Press the "Ti m e r" key
time. If you do not press this key, the time is
automatically memorised when a period of 10
seconds has passed without pressing any key.
The screen returns to the main menu.
10 sec/
Programming the timer
The appliance needs to be turned on with the
clock set in order to programme the start /
stop times.
Press the "Timer" key
the timer menu. Press the "+" key to
programme the different functions available on
your appliance. These are:
• "Off" : appliance not programmed.
• "Start" : programming the appliance
start time.
• "Start/ Stop"
appliance start and stop time.
• "Stop" : programming the appliance .
, to memorise the
, to navigate through
: programming the