Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Starting
1.
After a reset all Slave time switches show no U for a short
time. Thereby the infrared transmission can be checked.
Reset 1 switching times remain
MENU
Press
together.
Reset 2 also the switching times are
deleted
Press all 5 buttons together.
First of all release button
MENU
, then release
all other buttons.
The time starts at 0:00h.
2. Radio receiving
After connecting to the circuit voltage, after
a reset or by pressing button
OK
, the time
switch immediately tries to receive the time
code.
The time starts at 0:00h.
If the time switch realizes an appropriate
antenna signal only the symbol
flashes.
Every full hour the time switch tries to
receive the time code.
If any button is pressed or if it is not
possible to receive the time code, radio
receiving will be interrupted.
Fault corrective aktion
If 10 minutes after starting the radio receiving the symbol
is still flashing, the time switch does not receive an appropri-
ate signal.
Please check the installation, the antenna alignment or the
ambient conditions with regard to electromagnetic sources of
interference.
3. Setting current time and week-day manually
Button
MENU
activates the menu.
Select SET TIME... with button
OK
and confirm with button
.
Set current hour with buttons
and
OK
confirm with button
.
Set current minute with buttons
and
OK
confirm with button
.
Set current day with buttons
and
confirm with button
OK
.
Every full hour the time switch tries to
receive the time code.
4. Setting switching times
Button
MENU
activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
Select desired day with buttons
confirm with button
If the selected day is already containing a
programm, this program and Clr are displayed.
To clear the program press button
By pressing button
(see copying switching times).
Set ON time with buttons
confirm with button
Notice:
The setting is effected in minutes.
Press once = 1 minute
Hold button = higher speed
Set OFF time with buttons
confirm with button
For further settings see abovementioned.
A maximum of 8 ON and OFF times can be set per day.
Up to the 7th OFF time the settings for one
24
day have to be confirmed again with
18
6
button
OK
.
1234567
12
Copying switching times
Activate copy function with button
Select the day the switching times are to
be transferred to by pressing buttons
Confirm selection with button
For further days repeat operation.
SET TIME
Terminating program input
MENU
Press button
as often as the
current time appears.
SET TIME
5. Clear switching times
MENU
Button
activates the menu. Confirm PROG... with button
Confirm PROG NEW... with button
SET TIME
Select the desired day with buttons
1234567
and confirm with button
To clear program press button
New switching times can be set now (see §4).
24
In case this day does not contain a program, press button
twice.
18
6
1234567
Press button
MENU
as often as the current time appears.
12
OK
.
PROG
NEW
and
24
OK
.
18
6
1234567
12
OK
.
switching times can be copied
PROG
NEW OFF
and
24
OK
.
18
6
1234567
12
PROG
NEW
24
and
18
6
1234567
OK
.
12
PROG
NEW
24
18
6
1234567
12
PROG
NEW
24
.
18
6
1234567
.
12
PROG
NEW
24
OK
.
18
6
1234567
12
24
18
6
1234567
12
OK
.
PROG
NEW
24
18
6
OK
.
1234567
12
OK
.
OK
6. Inquiring switching times
OK
.
Button
MENU
activates the menu. Confirm PROG... with button
Select TIME CHECK... with button
ON
button
OK
. Select desired day with buttons
confirm with button
OK
.
Check the switching times subsequentlyby
pressing button
OK
Free storage locations
are displayed with FrEE.
Terminating check switching times
MENU
Press button
as often asl the
current time appears.
ON
7. Hand switch ON/OFF
Select hand symbol with
button
State of contact preset by the program
is reversed.
= ON
= OFF
The next effective alter statement automatically returns the
time switch to ON or OFF as programmed.
8. Continuous switching ON/OFF
Select symbol
for continuous
override ON with button
or
continuous override OFF
Terminating continuous switching
Select symbol
for automatic operation by pressing
button
.
9. Mains failure
OK
.
Mains failure will be displayed by no U.
Buttons are not operating.
Reset 1 is possible.
10. Testing the infrared transmission
After a short reset all slave time switches
display no U for a short time.
OK
.
and confirm with
and
TIME CHECK
ON
24
18
6
1234567
12
24
18
6
1234567
12
24
18
6
1234567
12
24
18
6
1234567
12
24
18
6
1234567
12
Werbung
Inhaltsverzeichnis
