Herunterladen Inhalt Inhalt Diese Seite drucken

Betriebsbedingungen; Haftungsbeschränkungen; Service Conditions; Restrictions On Reliability - DRIESCHER WEGBERG LDTMW Montage- Und Betriebsanleitung

Inhaltsverzeichnis

Werbung

DRIESCHER • WEGBERG

Betriebsbedingungen

Normale Betriebsbedingungen
Die Schaltanlage ist für normale Betriebsbedin-
gungen von Innenraum-Schaltgeräten und Schalt-
anlagen bei folgenden Umgebungstemperaturen
ausgelegt:
Höchstwert
Tiefstwert
Sonder-Betriebsbedingungen
Nach VDE 0670 Teil 1000 können von den nor-
malen Betriebsbedingungen abweichende Be-
triebsbedingungen zwischen Hersteller und Betrei-
ber
vereinbart
werden.
Betriebsbedingung muß der Hersteller vorher be-
fragt werden.
Hinweis zu etwaigen klimatischen Sonder-
Betriebsbedingungen:
Beim Betrieb von Schaltanlagen in Gebieten mit
hoher Luftfeuchte und/oder starken kurzzeitigen
Temperaturschwankungen besteht die Gefahr von
häufigen Tauniederschlägen. Zur
unzulässiger
Kondensationserscheinungen
sich dadurch möglicherweise ergebender Korrosi-
on sind in Absprache mit dem Hersteller Gegen-
maßnahmen (z.B. elektrische Heizung) zu ergrei-
fen.
Haftungsbeschränkungen
Alle in dieser Montage- und Betriebsanleitung ent-
haltenen technischen Informationen, Daten und
Hinweise für die Installation, Bedienung und War-
tung der Schaltanlage entsprechen dem Stand der
Drucklegung und erfolgen unter Berücksichtigung
unserer bisherigen Erfahrungen und Erkenntnisse
nach bestem Wissen.
Für etwaige Fehler oder Unterlassungen haften wir
unter Ausschluß weiterer Ansprüche im Rahmen
der im Hauptvertrag eingegangenen Gewährlei-
stungsverpflichtungen. Ansprüche auf Schadens-
ersatz, gleich aus welchem Rechtsgrund derartige
Ansprüche hergeleitet werden, sind ausgeschlos-
sen, soweit sie nicht auf Vorsatz oder grober
Fahrlässigkeit beruhen.
* bei Umgeungstemperaturen > 40°C Reduktionsfaktoren berücksichtigen
6
*
+60 °C
-25 °C
Zu
jeder
Sonder-
Vermeidung
und
LDTM
Service Instructions
Standard service conditions
The switchgear are designed for normal service
conditions of indoor switchgear and switching sy-
stems at the following ambient temperatures:
Maximum value
Lowest value
Special Operating Conditions
In accordance with IEC 60694, the manufacturer
and the owner can agree to operating conditions
that deviate from the standard conditions. The
manufacturer must be asked in advance about
any special service condition.
Note on eventual Climatic Special Operating
conditions
If switchgear are operated in areas with a high air
humidity and/or strong, rapid temperature oscilla-
tions, there is the danger of frequent dew preci-
pitations: To avoid inadmissible condensation
phenomena and the resulting corrosion the rela-
tive preventive measures have to be agreed with
the producer (i.e. electric heating).
Restrictions on Liability
All of the technical information, data and notes
about the installation, operation and mainte-
nance of the medium voltage switchgear con-
tained in these Operation and Assembly In-
structions are current as of the day of printing
and are stated to the best of our knowledge on
the basis of our experience and know-how.
We accept liability for any errors or omissions,
to the exclusion of further claims, within the
scope of the agreed warranty. Claims for com-
pensation for damage are excluded, regardless
of the legal basis for those claims, unless they
are the result of intent or gross negligence.
Translations are made to the best of knowled-
ge. Liability of any kind shall therefore not be
accepted for faults made in the translation even
if the operating instructions are translated by us
or by a third party. Solely the Germany text-
which can be made available on request-shall
prevail.
* at ambient temperatures > 40°C take care of the reduction factors
*
+ 60°C
-25°C

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis