Herunterladen Inhalt Inhalt Diese Seite drucken

Dust/Chip Extraction - Bosch PRIO Lithium-Ion Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PRIO Lithium-Ion:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
OBJ_BUCH-28-003.book Page 32 Friday, December 18, 2009 2:34 PM
32 | English
The lithium ion battery is protected against deep dis-
charging by the "Electronic Cell Protection (ECP)". When
the battery is empty, the machine is switched off by
means of a protective circuit: The inserted tool no longer
rotates.
Do not continue to press the On/Off
WARNING
switch after the machine has been auto-
matically switched off. The battery can be damaged.
Insert the machine into the battery charger 6 as shown in
the figure. Pay attention that the charge connector 7 en-
gages in the corresponding socket of the machine. The
charging procedure begins as soon as the mains plug of
the battery charger is plugged into a socket.
The charge-control indication 2 indicates the charging
progress. During the charging procedure, the 3 LEDs light
up one after the other and briefly go out. When the
3 LEDs light up continuously, the battery is fully charged.
During the charging procedure, the handle of the machine
warms up. This is normal.
Disconnect the battery charger from the mains supply
when not using it for longer periods.
Protect the battery charger against moisture!
Observe the notes for disposal.

Dust/Chip Extraction

Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful
to one's health. Touching or breathing-in the dusts can
cause allergic reactions and/or lead to respiratory in-
fections of the user or bystanders.
Certain dusts, such as oak or beech dust, are consid-
ered as carcinogenic, especially in connection with
wood-treatment additives (chromate, wood preserva-
tive). Materials containing asbestos may only be
worked by specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respira-
tor.
Observe the relevant regulations in your country for
the materials to be worked.
2 609 004 644 | (18.12.09)
Bosch Power Tools

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis