Functional Description; Intended Use; Product Features - Bosch PRIO Lithium-Ion Originalbetriebsanleitung

OBJ_BUCH-28-003.book Page 28 Friday, December 18, 2009 2:34 PM
28 | English
Children should be supervised to ensure that they do
not play with the battery charger.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (AS-
TA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.

Functional Description

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The machine is intended for dry sanding and polishing of
wood, filler and coated surfaces. It is especially suitable
for profiles, corners or hard to reach locations.
Use the battery charger only when you fully understand
and can perform all functions without limitation, or have
received appropriate instructions.

Product Features

The numbering of the product features refers to the illus-
tration of the machine on the graphics page.
1 On/Off switch
2 Battery charge-control indicator
3 Sanding sheet*
4 Sanding plate
5 Handle (insulated gripping surface)
6 Battery charger
2 609 004 644 | (18.12.09) Bosch Power Tools