Bosch PRIO Lithium-Ion Originalbetriebsanleitung Seite 31

OBJ_BUCH-28-003.book Page 31 Friday, December 18, 2009 2:34 PM
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
06
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
03.12.2009
Assembly
Before any work on the machine (e. g. maintenance,
changing the tool, etc.) as well as during its transport
and storage, lock the On/Off switch in the off posi-
tion. There is danger of injury when the On/Off switch
is unintentionally actuated.
Battery Charging (see figure A)
Do not use other battery chargers. The supplied bat-
tery charger is designed for the Lithium-Ion battery in
your machine.
Observe the mains voltage! The voltage of the power
supply must correspond with the data given on the
nameplate of the battery charger. Battery chargers
marked with 230 V can also be operated with 220 V.
Note: The battery is supplied partially charged. To ensure
full capacity of the battery, completely charge the battery
in the battery charger before using your power tool for
the first time.
The lithium ion battery can be charged at any time with-
out reducing its service life. Interrupting the charging pro-
cedure does not damage the battery.
Bosch Power Tools
English | 31
Dr. Eckerhard Strötgen
Head of Product
Certification
2 609 004 644 | (18.12.09)