Bosch PRIO Lithium-Ion Originalbetriebsanleitung Seite 34

OBJ_BUCH-28-003.book Page 34 Friday, December 18, 2009 2:34 PM
34 | English
Selecting the Sanding Sheet
Depending on the material to be worked and the required
rate of material removal, different sanding sheets are
available:
For the working of all wooden
materials
For coarse-sanding, e. g. of rough,
unplaned beams and boards
For face sanding and planing small
irregularities
For finish and fine sanding of hard
woods
For the working of paint/enamel
coats or primers and fillers
For sanding off paint
For sanding primer
For final sanding of primers before
coating
For reworking or polishing, especially of metal and stone,
use fleece/polishing cloth pad.
Depending on the desired surface quality of the work-
piece, different fleece types or polishing cloth pads are to
be used.
Replacing the Sanding Plate (see figure D)
The supplied sanding plate 4 is fitted with Velcro backing
and can be replaced. To remove the sanding plate 4,
grasp it at one of the tips and pull it off.
2 609 004 644 | (18.12.09)
Grain size
40—180
coarse 40
medium 80, 120
fine 180
40—180
coarse 40
medium 80, 120
fine 180
Bosch Power Tools