Functional Description; Intended Use; Product Features - Bosch GBS 75 AE Professional Originalbetriebsanleitung

16 | English
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
2 609 932 722 | (17.12.09)
Downloaded from www.Manualslib.com manuals search engine

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for dry sanding–with
high removal capacity–of wood, plastic, metal,
filler as well as varnished surfaces.

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Auxiliary handle (insulated gripping surface)
2 Sanding belt*
3 Clamping lever for sanding belt
4 Thumbwheel for belt speed preselection
5 On/Off switch
6 Lock-on button for On/Off switch
7 Dust bag
8 Handle (insulated gripping surface)
9 Adjustment knob for belt run
10 Extraction outlet
11 Protection cover
12 Dust passage
13 Graphite plate*
14 Guide plate
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools