Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Guide
X-axis Module
X-axis Limit Switch Cable
X-axis Connection Screw (S7)
Assembly Step 02:
1. Connect the stepper motor cable and the limit switch cable of the Left Module and
X-axis Module.
2. Per the diagram place the cables into the cable channels.
3. Place the X-axis Module on the Left Module and Right Module and align the X-axis
Module with the positioning pin on the Left Module.
4. Turn the machine over and place it on the desktop before proceeding to the next step.
07
Werbung
Inhaltsverzeichnis
