Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Guide
Laser Head Module
Spring Washer (N6)
Laser Head Module
Connection Screw (S10)
Assembly Step 04:
Align the X-axis module with the laser head module. Place the Spring Washers(N6) into the Laser Head Module Connection
Screws (S10) and insert four screws (S10) into the laser module mounting holes. Then align them with the screw holes on the
laser module and tighten them with the included 2.5mm hex wrench.
09
Werbung
Inhaltsverzeichnis
