Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Guide
Spiral Cable 02
Assembly Step 05:
1. Connect the Front Module and X-axis Module with the Spiral Cable 01 and plug the type-c interface to the CON01 Port on the
Right Module.
2. Fix the Spiral Cable 01 on the Right Module and the X-axis Module with Cable Clip 01.
3. Connect the Right Module and Laser Head Module with the Spiral Cable 02. Plug the type-c interface to the CON02 Port on
the Right Module. The three-pin connector on the other end should be connected to the corresponding connector on the Laser
Head Module.
4. Use Cable Clip 02 to fix the spiral cable on the X-axis Module and Right Module.
10
Cable Clip
Cable Clip
Cable Clip
Spiral Cable 01
Spiral Cable 01
Spiral Cable 02
Werbung
Inhaltsverzeichnis
