Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Assembly Guide
Limit Screw
08
X-axis Connection Screw (S7)
X-axis Module
Limit Screw
Limit Screw
Assembly Step 03:
1. Push the sliders on both sides of the Y-axis (left
module and right module) on the limit screws as
illustrated to ensure that both sliders are aligned.
2. Insert four X-axis Connection Screw (S7) into
the screw holes and tighten them with a 2.5mm
hex wrench.
3. Remove the limit screws when all four X-axis
Connection Screw (S7) are properly tightened.
X-axis Connection Screw (S7)
X-axis Module
Werbung
Inhaltsverzeichnis
