Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
P a r t 6 ： P r e c a u t i o n s f o r c o m m o n p r o b l e m s o f
e n g r a v i n g m a c h i n e
1. When connecting the software and the device, please select the correct COM port and the baud rate of 115200
to ensure that the connection between the computer port and the USB cable is not loose.
2. If laser-assisted tuning is required, please confirm whether the various mechanisms are loose before engraving
(whether the timing belt, the roller eccentric column, and the laser head are loose or shaken)
3.Correctly adjust the focus and confirm that the distance from the end of the laser protective cover to the
engraving is 2mm.
4.LaserGRBL/LightBurn software can refer to the parameter table in the corresponding manual for engraving and
cutting of different materials. The engraving of mirror metal requires manual surface blackening treatment.
Werbung
Inhaltsverzeichnis
