S t e p 5
Y
Y-axis limiter
Use a wrench to turn the eccentric
nut to adjust the tightness of the
guide wheel and the guide rail
X
Installation Manual:
1. Adjust the eccentric nut to ensure that the X-axis and Y-
axis move smoothly without shaking.
TIPS:
How to determine the tightness of eccentric nuts?
Under the condition of ensuring that the bracket does not
shake, you can lift one end of the machine to an angle of 45
degrees with the horizontal plane, and release the X-axis or
Y-axis bracket from a high place. If the bracket can slide at a
constant speed to the end, the tightness is suitable.