ATOMSTACK X7 Pro Serie Installationshandbuch Seite 16

1、Before using the engraving machine, please
insert the SD card into the control box card slot
along the dotted line. If the SD card is not inserted,
the engraving machine cannot be operated after
entering the operation display. When inserting the
card, pay attention to the front and back of the SD
card. Insert the card into the card slot on the
reverse side (see the picture for correct insertion)
Display operation instructions
1
2
2、This is the boot interface, which has two major
functions.
1.Click the engraving button to enter the engraving file
list interface.
2.Click the setting button to enter the setting interface.