Herunterladen Inhalt Inhalt Diese Seite drucken

Use; Selecting The Temperature - AERMEC Omnia HL N-Serie Bedienungs- Und Installationsanleitung

Gebläsekonvektor für universellen einbau mit elektronischem thermostat
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 53

USE

Starting
- To start up the fan coil, turn the knob and choose a ventilation speed.
- To switch off the fan coil, turn the knob to the position
-
The fan coil is switched off.
OFF
In the OFF condition, the thermostat carries on working.
If the room temperature falls below 7°C, and the system conditions allow it,
the thermostat will activate ventilation (anti-freeze function).
Selecting the ventilation speed
-
The thermostat maintains the set temperature by automatically changing the
AUTO
ventilation speed on the basis of the room temperature and the set temperature.
-
The thermostat maintains the set temperature by means of ON-OFF cycles, using
the minimum fan speed.
-
The thermostat maintains the set temperature by means of ON-OFF cycles, using
the average fan speed.
-
The thermostat maintains the set temperature by means of ON-OFF cycles, using
the maximum fan speed.

Selecting the temperature

- To increase the room temperature, turn the knob to the right (+).
- To reduce the room temperature, turn the knob to the left (-).
The temperatures are not indicated on the panel because, on one single knob
position, the value changes in line with the operating mode (Heating, Cooling or
Anti-freeze).
The maximum and minimum temperature differences compared with the central
position are +8°C and -8°C; only with the anti-freeze function is the set temperature
fixed throughout the field.
The temperature with the selector set in the central position is:
• Heating 20°C
• Cooling 25°C (standard configuration with dead band 5°C)
• Anti-freeze: the minimum room temperature is 7°C in all selector positions (the
12°C set activates automatically)
Season changeover
Water side changeover: the thermostat automatically sets Heating or Cooling operation according to the temperature
of the water in the system.
Air side changeover: for special settings, the season change function can be set by operating the temperature selector.
.
OFF
IHLNLJ 2204 - 6887212_02
AUTO
OFF
AUX
AUTO
OFF
AUX
AUTO
OFF
AUX
25

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis