Electrolux EH7L2XWE Benutzerinformation Seite 25

10.2 How to remove: Shelf supports
Remove the shelf supports to clean the oven.
Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
10.3 How to use: Catalytic cleaning
The cavity is coated with catalytic enamel. It
absorbs fat during catalysis.
Turn off the oven and wait until it is
cold.
Step 1
Set the function and the oven tem‐
perature: 250 °C
Duration: 1 h
10.4 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
Before the catalytic cleaning
Remove all accessories and remova‐
ble shelf supports.
Clean the oven with catalytic cleaning
Step 2
After cleaning, turn the knob for the
oven functions to the off position.
1
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean the oven floor and the inner
door glass with warm water, soft
When the oven is cold, clean the
CAUTION!
Carefully handle the glass,
especially around the edges of
the front panel. The glass can
break.
2
cloth and mild detergent.
Step 3
cavity with a wet soft cloth.
ENGLISH 25