Mounting The Tracer Tonearm Without Vta-Lifter - Clearaudio Tracer Bedienungsanleitung

User manual / Bedienungsanleitung
3. Mounting the
Pic. 8: Mounting the clamping ring
Pic. 9: Mounting the tonearm
Made in Germany
Tracer
tonearm without VTA-Lifter
Take the clamping ring and place it on the recess
in the tonearm base.
Now you can attach the clamping ring to the
tonearm base with the 3 supplied M4 x 10
screws. Make sure that the side hole of the
clamping ring (see Pic. 9) remains accessible.
Insert the tonearm cable first and then the
Tracer
tonearm foot of the
of the clamping ring.
Now fix the tonearm, do not over-tighten, so
that you can finally adjust it later!
Tracer
To assemble the
please follow the separate user manual for the
VTA-Lifter.
tonearm into the hole
tonearm with VTA-Lifter,
Page / Seite 9