Maintenance; Protecting The Environment - DeWalt D25980 Anleitung

Instructions for use
● Always observe the safety instructions
@
and applicable regulations.
● Be aware of the location of pipework
and wiring.
● Apply a pressure of approx. 20 - 30 kg
to the tool. Excessive force does not
speed up chiselling but decreases tool
performance and may shorten tool life.
Switching on and off (fig. A)
● To run the tool, press the on/off switch (1).
● To stop the tool, release the switch.
Demolition, chasing and channelling (fig. A)
● Select the appropriate chisel, and clean and
grease its shank.
● Insert the chisel and check whether it is
properly locked.
● Hold of the tool at both handles (2) and switch
on. The tool now runs in continuous operation.

Maintenance

Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
● This machine is not user-serviceable. Take the
tool to an authorised D
approximately 200 hours of use. If problems
occur before this time contact an authorised
D WALT repair agent.
E
A
Lubrication
Your power tool requires no additional lubrication.
S
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
WALT repair agent after
E
Never use solvents or other harsh
@
chemicals for cleaning the non-metallic
parts of the tool. These chemicals may
weaken the plastic material used in
these parts. Use a cloth dampened only
with water and mild soap.
Accessory maintenance
Accessory maintenance at the right time
guarantees optimal results in application and a
long and efficient accessory life.
● Grind the chisels on grinding discs. Refer to fig.
C for the appropriate angles of the following
chisels:
- spade-shaped chisel (14)
- cold chisel (15)
- pointed chisel (16)
These chisels can be reground
@
only a limited number of times. If
in doubt, contact your dealer for
recommendations.
Ensure that the cutting edge does not
@
show discolouration caused by too
much pressure. This may impair the
hardness of the accessory.

Protecting the environment

Separate collection. This product
Z
must not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products
z
and packaging allows materials to
be recycled and used again. Re-use
of recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
E N G L I S H
WALT product
E
29