Initial Use; Charging The Power Bank - Silvercrest SPB 2.600 D1 Bedienungsanleitung Und Sicherheitshiweise

SilverCrest SPB 2.600 D1

7. Initial use

Never charge the Power Bank while it is being
used to charge an external device.

7.1 Charging the Power Bank

Due to the high current consumption, do not
charge the Power Bank on a notebook/PC but
only
(5 V
To charge the internal battery of the Power Bank, connect the
Power Bank to a suitable USB mains adapter (not included in
the package contents) using the supplied USB charging cable
(B). To do this, plug the Micro-USB connector of the USB
charging cable (B) into the Micro-USB socket (7) of the
Power Bank, and plug the USB connector into the USB socket
of the mains adapter. During the charging process, the LEDs
(2, 3, 4, 5) give you information about the current charge
level of the Power Bank.
LED display
One LED flashes
One LED flashes, one LED lights up
One LED flashes, two LEDs light up
One LED flashes, three LEDs light up
All LEDs light up
32 - English
with a
, at least 1 A).
suitable mains
Charge level
0–24%
25–49%
50–74%
75–99%
100%
adapter