Canon TU-06 Einrichtungsanleitung Seite 23


Load the left side of the Rewind Spool on the Media Take-up Unit so that the gear (a) on the
right side of the Rewind Spool meshes with the gear (b) of the Right Media Take-up Unit.
Remove the Media Take-up
Before transporting the printer, you must follow described procedure in reverse to remove the Media
Take-up Unit then pack it in its original package. However, it is not necessary to remove the two cord
fasteners.
Important
• Once you have attached the cord fasteners, do not remove them. Using force to remove
the fasteners may damage them.
• When disconnecting cables, grasp them firmly by the plug. Pulling them out by the cord
may damage the cables.
b
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
7
a