Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Media Take-up Unit TU-06
This document describes the installation and removal of the Media Take-up Unit TU-06.
Installation Overview for the Media Take-up Unit
Unpack and Make Sure You Have Everything
2~3
Turn off the printer and unplug it
4
Stow the Output Stacker
5~ 5~
Install the Media Take-up Unit
Caution
•
The Media Take-up Unit weighs approximately 1.3 kg. To avoid injury, hold it
securely during installation and be careful not to drop it.
Important
•
Avoid accidentally hitting the Media Take-up Unit and Sensor Unit, which may impair
operation.
Note
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
•
For Media Take-up Unit instructions, refer to "Using the Media Take-up Unit" in the
User's Guide for the printer.
Setup Guide
If installed at the same time as the printer
If installed after the printer is in use
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Werbung
