Canon TU-06 Einrichtungsanleitung Seite 20

5
Firmly secure the Left Fastener for Media Take-up Unit and Right Fastener for Media
Take-up Unit to the front (a) and back (b) of the Top Stand Stay using four M4 hex screws on
each side by the Allen Wrench.
6
Hook up the hole (a) of the Left Media Take-up Unit with the protrusion (b) of the Left
Fastener for Media Take-up Unit, and hook up the hole (c) of the Right Media Take-up
Unit with the protrusion (d) of the Right Fastener for Media Take-up Unit. Secure the Media
Take-up Units firmly by using three M4 hex screws (e) on each side by the Allen Wrench in
the sequence shown.
a
b
a
a
c
4
b
d
e
b
e