Viscount Vivace 50 Deluxe Bedienungsanleitung Seite 75

Owner's Manual
When each value is selected, the relative PG will be transmitted automatically.
If, for example, the pedal board MIDI A channel is number 3, when 20 is selected beside the "PEDAL"
field, Program Change n. 20 will be transmitted on the MIDI 3 channel.
It is important to underline that the Program Changes set in this screen are saved in the specific and
general combinations. To do this, simply select the PG messages in the screen described above and save
the combination required.
All this is particularly useful when you are using a remote expander, for example, and wish to obtain a
specific voice in combination with the stops activated by means of the combination.
If transmission of the PG is not necessary, saving of the PG can be aborted by selecting the value OFF.
7.3 SETTING THE FILTERS
A MIDI filter is a special function which allows a specific message to be cut out on all the MIDI
channels (if it is a channelled message) in transmission and/or reception.
For example, the Control Change transmission filter allows you not to transmit these MIDI messages on
the [MIDI OUT] port on all the MIDI channels controlled by the organ.
Similarly, the reception filter cuts out the CCs received by the organ by means of the [MIDI IN] port on
all the channels (i.e. the CCs are not applied).
To set up the MIDI filters select the TX/RX FILTERS field in the MIDI submenu. The following screen
appears:
The filters for the following messages (shown in the top left-hand corner of the display) can be switched
on and off:
o CC: Control Change (control messages)
o PG: Program Change (messages for selecting programs/voices)
o SYSEX System Exclusive (system exclusive messages)
o REAL: Real Time messages (Active Sensing).
The right-hand side of the display contains the fields for the setting the filters for each type of message.
The settings are:
- NO/NO: both filters off.
- YES/NO: filter only active on messages transmitted
- NO/YES: filter only active on messages received
- YES/YES: filter active on both received and transmitted messages.
When a filter is activated the relative MIDI message is not transmitted / received.
Press [EXIT] to return to the MIDI menu and save the new settings.
Viscount Vivace 60 Deluxe - 60 - 50 Deluxe
73