Viscount Vivace 50 Deluxe Bedienungsanleitung Seite 62

Viscount Vivace 60 Deluxe - 60 - 50 Deluxe
Once replacement of the voice or voices is complete, you need to check the labels on the front panel stops
and whether they still correspond to the registers which the stops now activate. To do this, run the SOUND
CHECK function described below.
Finally, press [EXIT] to exit the function.
ORCHESTRAL VOICES
The voice library of Vivace series organs also includes a set of orchestral voices which can be recalled by
means of the ALTERNATIVE VOICE function. These orchestral voices cannot be to assigned to any
stop at random. The possible associations are:
- first stop of pedalboard of : Finger Acoustic Bass, Bowed Acoustic Bass, Tuba
- fourth stop of Man.I and fifth stop of Man.II: Strings1, Strings2, Choir1, Choir2, Choir3, Harpsichord,
Harp, Celesta, Chimes (range on keyboard reduced to E2-G5)
IMPORTANT NOTES
- The voices for loaded for each stop are automatically saved in the current Organ Style (see also
section 4). This means that when another style is recalled, the voices will be reset to the last style
recalled. When the style in which the voices were changed is reloaded, the voices will be reset to
the latest adjustments.
- When a replacement voice is loaded, it will be assigned the volume value set for the voice
present on the relative stop before the change was made.
- To restore the original voices of all the styles or one in particular, recall the FACTORY SETTING
function described in point 8.1.
5.3 CHECKING THE STOP LABELS
After a different style has been selected or alternative voices have been loaded, there is the risk that the
labels on the stops no longer correspond to the voices which they recall.
You will therefore need to check the correspondence between the voice and the label, and replace the
label if it is no longer correct.
The SOUND CHECK function is available for this purpose. To activate this function, select the SOUND
CHECK field in the SETTING MENU with the aid of the usual selection buttons. The video page displayed
is as follows:
The STOP field contains the number of the stop being checked (which will be illuminated on the panel),
while the bottom line contains the voice currently associated to the stop concerned.
SECTION indicates the section to which the stop belongs.
60
Owner's Manual