Husqvarna BMG 444 Bedienungsanweisung Seite 20

• Do not turn the product more than 45° on a ramp.
To move the product manually
WARNING:
are stationary before you move the product.
WARNING:
steel toe-cap and non-slip sole.
1. Disconnect the power plug.
2. Disconnect the dust extractor hose.
3. Lock the dust skirt. Refer to
transport position on page 21
4. Tilt the product. Refer to
20 .
5. Push the product by the handles.
To tilt the product
WARNING:
steel toe-cap and non-slip sole.
1. Adjust the handlebar to vertical position. Refer to
adjust the height of the handle and handlebar on
page 12 .
2. Hold the handlebar and push down the support
frame with one foot to tilt the product rearward.
To lift the product
WARNING:
equipment has the correct specification to
20
Wait until all moving parts
Use protective boots with
To set the product in
To tilt the product on page
Use protective boots with
Make sure that the lifting
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product. Keep bystanders
away from the work area.
WARNING:
product. Make sure that the lifting eyes are
correctly installed and not damaged.
1. Attach the lifting equipment at the lifting eyes (A).
To
A
2. Lift the product safely.
Do not walk or stay below
Do not lift a damaged
A
A
A
1914 - 001 - 28.06.2022