Data Protection; Backlight - Kenwood CR-ST700SCD Bedienungsanleitung

24. Data protection

Please read the data protection regulations listed there or go to this website:
www.frontiersmart.com/privacy

25. Backlight

The display illumination can be programmed in 3 brightness levels. The following settings can be
made in the "Backlight" menu:
"Timeout": Time until the display is set to the "Dim level" lighting level.
Choices: "On / 10 / 20 / 30 / 45 / 60 / 90 / 120 / 180 seconds"
"ON" means that the radio always remains in the brightness level of the "On level".
"On level": Brightness of the display when the radio is switched on.
Choices: "High" / "Medium" / "Low"
"Dim Level": Brightness adjustment for operation and standby.
Choices: "Medium" / "Low"
26. UNDOK - control of the radio via App
The UNDOK application (App) developed by Frontier Silicon gives you full control of radios and
speakers on your smartphone.
Regardless of whether you are setting up the device for the first time, configuring Equaliser or
managing your favourite channels - UNDOK offers you all the features on your smartphone or tablet
and offers you even more convenience. Download the UNDOK App from the Google Play Store or the
Apple App Store.
Initial setup of the device with UNDOK
When switched on for the first time, or after the radio has been set to the factory settings, the radio
is in SETUP mode and a so-called micro-access point (own WLAN network) is generated. This allows
your smartphone or tablet to connect to the radio.
Set up with Android
Make sure the radio is in SETUP mode. Open the UNDOK-APP on your smartphone or tablet and
select the menu item "Set up audio system".
Press "NEXT" and select the menu item "SELECT THE ACCESS POINT".
The WLAN menu of the terminal device opens up, select the "KENWOOD CR-ST700SCD" network
there. After connecting, "Connected to KENWOOD CR-ST700SCD" appears in the App. Follow the
further instructions of the App to set up the radio completely. Finally, the radio connects to the network
& you can now operate the device with the UNDOK APP by pressing "Use my audio system".
Set up with iOS
Make sure the radio is in SETUP mode. Open the UNDOK APP on your iPhone or iPad, and select the
menu item "Set up audio system".
Press "NEXT" and select the menu item "SELECT THE ACCESS POINT".
The WLAN menu of the terminal device opens up, select the "KENWOOD CR-ST700SCD" network
there. After connecting, "Connected to KENWOOD CR-ST700SCD" appears in the App. Follow the
further instructions of the App to set up the radio completely. Finally, the radio connects to the network
& you can now operate the device with the UNDOK APP by pressing "Use my audio system".
26