Additional Information - Kenwood CR-ST700SCD Bedienungsanleitung

3.7 Additional information

By repeatedly pressing the <INFO> button, depending on the source and station, additional information
can be displayed:
• Description
• Name of the station, the current program, content, topics, etc.
• Genre
• The program style (genre) of the station is displayed.
• Signal level and signal error
• Bit rate
• Channel information
• Today's date and current time
In the "FM radio" and "DAB + Digital radio" modes, information on reception strength, stereo mode,
RDS signal (only FM) and preset memory is available on the lower right edge of the Display. If the
corresponding display is missing, the information is not available.
3.8 Setup wizard
At the first Start, the Setup Wizard starts automatically.
The setup wizard runs in English.
You can skip the wizard and call it up again later in German.
3.9 Setting the menu language
At the first start-up all available menu languages are listed. Select the desired language with the
<UP/DOWN> button and confirm with <OK>.
3.10 Starting the setup wizard
For a simple and quick initial start-up (setting the time and date, setting up the internet connection,
etc.), we recommend that you run the setup wizard. To do this, please select "YES". If you want to
skip the setup wizard, select "NO".
All settings that are made using the setup wizard can later be made individually via the system
settings. Alternatively, the setup wizard can be run again at any time. Then select "YES" or "NO" to
run the setup wizard automatically or not to run the next time the radio is started. Then you are at
the Main menu.
• Date / Time
12/24 Hour format
• Automatic update (time & date)
Update from DAB or FM (recommended)
With automatic updates via the FM/DAB/DAB + radio network, the time and date are provided
by the broadcasters. When adjusting via these sources, the time is set correctly even after a
power failure. This means that set wake-up times can also be observed.
• Update from NET
When this option is selected, the time and date are automatically set via the Internet connection.
In addition, the time zone and summer/winter time can be adjusted.
• No update
Time and date must be set manually.
• Keep network connection
The network configuration is discussed in more detail in Section "System Settings".
10