Heating Function - DeLonghi Pinguino F16DGT Betriebsanleitung

I 24-07-2001 15:59 Pagina 28
VENTILATION FUNCTION/PURIFICATION
On humid but not particularly hot days, it may be sufficient to ope-
rate the appliance in ventilation/purification mode.
• Press the button. A beep will indicate that the air-conditioner
has turned on, and the
• Now press the MODE button until the ventilation symbol
appears on the display.
• Once the ventilation has been activated, press the
repeatedly until you get the desired fan speed.
It should be pointed out that when the automatic ventilation func-
tions are activated, the appliance itself will choose the proper
speed.

HEATING FUNCTION

• Press the button. A beep will indicate that the air-conditioner
has turned on, and the
• Then select the MODE switch until the display shows the heating-
function symbol
• At this point the desired temperature should be set: to reduce
temperature press the
The fan speed, in the heating mode, cannot be regulated
manually, only automatically.
FULL AUTO FUNCTION
FULL AUTO automatically activates the air-conditioner, including
the temperature, fan speed thus assuring the best possible condi-
tions for the room.
• Press the button. A beep will indicate that the air-conditioner
has turned on, and the
• Now use the MODE button until the FULL AUTO symbol appears
on the display.
The appliance will automatically establish the optimum mode (air
conditioning, dehumidification, ventilation) and speed.
28
Selecting functions
symbol will begin to blink.
symbol will begin to blink.
.
button.
symbol will begin to blink.
button
.
.