Cooling Mode; Heating Mode; Smart Mode; Automatic Mode - DeLonghi PLS 120 AR Bedienungsanleitung

COOLING MODE

The cooling function allows the air conditioner to be started
and used as a producer of cool air.
To activate the cooling function (COOL), press the MODE
button until the symbol ( ) appears on the display.
To change the temperature value, use the (
tons. Each time the buttons are pressed the set temperature
value increases or decreases by 1°C.

HEATING MODE

The heating function allows the air conditioner to be started
and used as a producer of hot air.
To activate the heating function (HEAT), press the MODE
button until the symbol (
To change the temperature value, use the (
tons. Each time the buttons are pressed the set temperature
value increases or decreases by 1°C.
The appliance is fitted with a Hot Start function, which de-
lays appliance start-up for a few seconds to ensure an im-
mediate output of hot air.

SMART MODE

Automatic mode

To activate the SMART function, press the (
the remote control. The writing AU (AUTO) will appear on
the display.
In the SMART mode the fan speed and the temperature
are set automatically according to the room temperature
to ensure user comfort.
Room temperature
23°C ~ 26°C
Above 26°C
Below 23°C
Note: after having stopped the SMART function, the air
conditioner will start up with the settings of the previously
selected modes.
ENGLISH
8
-
and ). but-
+
) appears on the display.
-
and ). but-
+
) button on
Mode
FAN ONLY
COOLING
HEATING
12:38
AM
OFF TIMER
MODE
-
+
RESET
ON OFF
88
12:38
AM OFF TIMER
MODE
-
+
RESET
ON OFF
88
12:38
AM OFF TIMER
MODE
-
+
RESET
ON OFF
A U
USER
INTELLIGENT REMOTE CONTROL
USER
INTELLIGENT REMOTE CONTROL
USER
INTELLIGENT REMOTE CONTROL
AUTO
SINGLE SPLIT